Tftp File Transfers | Asante Technologies 35160 guide

3.14.6 TFTP File Transfers

The software image file must be downloaded from a server on the network that is running a TFTP server application.

IntraCore 35160-T TFTP File Downloading Menu


Bank 1	Image Version/Date:		1.20B/Jun 17 2003	20:41:25 (Running)
Bank 2	Image Version/Date:		1.10 /May 20 2003	18:01:54
File Type:		Image
Server IP:		xxx.xxx.xxx.xxx
File Name:		rt35160_120B.IMA
Retry Count:		5

Destination Bank: 2

<Cmd> <Description>

sSet Server IP Address

fSet File Name

tToggle File Type

cChange to File Upload

dDownload Image File to Destination Bank

bDownload and Reboot from the Image File

rSet Retry Count

aToggle Destination Bank

qReturn to previous menu

root>

To upgrade the switch software via TFTP, use the following procedure:

1.Access the TFTP Image File Downloading Configuration Menu by typing t in the System Utility Menu.

2.Type s to set the image server IP address.

3.At the prompt, enter the IP address of the server containing the image file, then press Enter.

4.Type f to set the image file name.

5.At the prompt, enter the image file’s name and path, then press Enter.

6.Type r to set the retry count.

7.At the prompt, enter the number of attempts the switch will make to download the image file, then press Enter.

8.Select the Destination Image Bank by typing a. Select the Bank on which the software is not currently running.

9.To download the image file to the destination bank, type d. This option allows the user to change the boot bank at a later time or to use the System Reset Configuration to schedule a reset, at which time the new software will be run.

OR

To download the image file and reset the switch, type b. This option immediately boots the switch with the new version of software.

10.Type q to return to the System Utility Menu.

44

Image 44

Asante Technologies 35160 user manual Tftp File Transfers

Contents

IntraCore 35160 Series Quick Start Guide Layer 2 Gigabit Switches User’s Manual IntraCore 35160 Series Table of Contents Page Features Introduction LEDs SwitchCore CXE2010Package Contents 1 IC35160-T 2 IC35160-G Management and Configuration Front and Back Panel Descriptions Snmp Management Console InterfaceWeb-Based Interface Hardware Installation and Setup Installation OverviewSafety Overview Recommended Installation Tools Installation into an Equipment Rack Power RequirementsEnvironmental Requirements Cooling and Airflow Installing a Gbic Gbic Interfaces Installing the Optional Emergency Power Supply Connecting PowerRemoving a Gbic Gbic Care and Handling Connecting to the Network 1 10/100/1000BaseT Ports Cabling Procedures Connecting to a Console SetupGigabit Ethernet Ports Cabling Procedures Connecting Via the Web Browser Connecting Via Telnet Changing the Password IP Assignment Simple Network Management Protocol Snmp Configuration Accessing a SubmenuLogging Exiting a Submenu Configuration Menu General Information Administration Configuration Changing System Administration Info Changing System IP Information System IP ConfigurationPort Configuration Page Advanced Port Configuration Enabling or Disabling a Port Setting Port Class of Service Setting Port Default PrioritySetting Port Maximum Packet Length Enabling or Disabling 802.3x Flow Control Unicast Forwarding Database Configuration Global Port Configuration Displaying the Forwarding Database Setting the MAC Address Age-Out Time Security ManagementVlan Management Searching for a MAC Address Changing Community Strings Protocol ConfigurationSnmp Configuration Enabling Authentication Traps Adding or Updating a Trap Receiver Spanning Tree Protocol STP Configuration Deleting a Trap Receiver Enabling and Disabling STP Spanning Tree Port ConfigurationSetting Port Priority and Path Cost Trunk Group Configuration Assigning Packets to Priority Queues QoS Priority Queue ManagementDefining the Priority List Example Setting SSH/Telnet UI Time-out User Interface ConfigurationSetting Console UI Time-out Period Enabling or Disabling SSH and Telnet Change PasswordAdding or Deleting an Access Host Enabling or Disabling the Web Server Access ControlSystem Utilities Adding or Deleting a Monitor Port Port MirroringEnabling or Disabling System Port Mirroring System Clock System ResetResetting the Switch Scheduling a System Reset System Log Bootstrap Configuration Clearing the System Log Tftp File Transfers Statistics Ping Utility Rmon Management Advanced ManagementSnmp and Rmon Management Duplicated IP Detection and Trap Enabling and Disabling Duplicated IP DetectionEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP Addresses Configuring Port Security Enabling and Disabling Station Movement Trap Configuring Port New Node Detection Trap Configuring Port Lock and Intruder Lock Port-based Network Access Control Configuring Security Level 2 or LevelSetting the Intruder Trap Resetting Security to DefaultsPage Port Control Settings Name Description Setting Timers Server Port Setting Radius ParametersRadius Server IP Vlan Management Vlan Specifications for the IntraCore 35160 SeriesOther Vlan Features of the switch Configuring Static Vlan Groups Creating a Vlan Advanced Static Vlan Configuration Configuring Vlan Port Attributes Setting the Port Vlan IDConfiguring Port Receive Frame Type Adding and Deleting VLANs from the Port Setting Port Type Displaying a Summary of Vlan Groups Resetting Vlan Configuration to Defaults IP Multicast Traffic ManagementDisplaying a Vlan Port Summary Multicast Addresses Enabling and Disabling Igmp Snooping Configuring IP Multicast Traffic ManagementIgmp Snooping Advanced Igmp Configuration Displaying a Summary of Group Addresses IP Multicast Forwarding Database Configuration Adding Ports to the Selected AddressInserting a Multicast Group Address Removing a Multicast Group Address Accessing with a Web Browser Web-Based Management Management Buttons Front Panel ButtonGenl Info General Information Button Port Config Port Configuration Button Span Tree Spanning Tree Button Snmp Button Addr Address Table Button Vlan Group Create Vlan ConfigurationVlan Button Port Configuration Set Port TypePort Vlan ID Pvid Acceptable Frame Type Trunking Button Security ButtonPort Ingress Filtering Tag/Untag Port Egress TypePage Snmp Protocol Snmp ManagementSnmp Management Operations Name Space Path Community Name and SecurityMIB Tree MIB Groups Supported Switching Concepts VLANsPort-Based VLANs Vlan ID and Tagged Frames Spanning Tree Protocol Port Vlan IDHow It Works Spanning Tree Parameters Full Duplex Spanning Tree Port ConfigurationFull Duplex, Flow Control, and Auto-negotiation Flow Control Auto-Negotiation Appendix A. Troubleshooting Problem Possible Solutions Physical Characteristics Appendix B. Features and SpecificationsSpecifications Standards Compliance Technical Support and WarrantyEnvironmental Range IntraCare Warranty Statement Appendix C. FCC Compliance and Warranty StatementsFCC Compliance Statement Important Safety Instructions Page Pin Number Signal Name Appendix D. Console Port Pin Outs Appendix E. Online Warranty Registration Appendix F. BootP Configuration Bootstrap ConfigurationImage Banks Loading Software Locally BOOTP-TFTP Loading Software Remotely