![](/images/new-backgrounds/1187540/18754047x1.webp)
IntraCore
Port: [01] Port Name: <none>
| 1 | 8 | 9 | 16 |
Operating Status: | ======== | ======== | ||
Auto Negotiation: | ******** | ******** | ||
Speed/Duplex: | gggggggg | ggFgggHg |
Port Status: Enabled | Link | Status: | Down (GMII) | |
Enabled | Link | Speed: | N/A | |
<Cmd> | <Description> |
|
|
|
h | Help for Legends |
|
|
|
tToggle Port Status Enable/Disable
a Enable/Disable
l Set 10M/100M/1000M bps Link Speed
d Toggle Half/Full Duplex
v Advanced Port Configuration
g Global Port Configuration
e Set port name
q Return to previous menu
root>
S)elect port N)ext port P)rev port
To see legends explaining the symbols used for both the Basic and Global Port Configuration Menu settings, type h. A screen appears, as shown below.
Legends for | port status: | Legends for port speed & duplex: | ||||||
X | - | Absent | f - | 10 | Mbps | & full duplex | ||
- | - | Link down | F - | 100 | Mbps | & full duplex | ||
D | - | Disabled by Mgmt Action | h - | 10 | Mbps | & half duplex | ||
d | - | Disabled by Security Violation | H - | 100 Mbps | & half duplex | |||
B | - | Blocking | G - | 1 Gbps & | full duplex(fiber) | |||
S | - | Listening | g - | 1 Gbps & | full | |||
duplex(copper) | Legends for port priority: | |||||||
R | - | Learning | ||||||
+ | - | Forwarding | 0 | - priority | 0 | (lowest) | ||
M | - | Mirror Port | 1 | - priority | 1 |
| ||
Legends for | Enable/Disable State: | 2 | - priority | 2 |
| |||
3 | - priority | 3 |
| |||||
- | - | Disabled | 4 | - priority | 4 |
| ||
* | - | Enabled | 5 | - priority | 5 |
| ||
Legends for | 6 | - priority | 6 | (highest) | ||||
7 | - priority | 7 | ||||||
A | - | Legends for | ||||||
B | - | * - Enabled |
|
| ||||
C | - | C - Disabled, Copper only | ||||||
D | - | F - Disabled, Fiber only | ||||||
Press any | key to continue... |
|
|
|
|
|
|
24