System Utilities, Access Control | Asante Technologies 35160

3.13.6 Enabling or Disabling the Web Server

The current HTTP Server Status is shown in the User Interface Configuration.

Important! For security, the web server is disabled by default. It cannot be enabled if SSH is currently enabled. One or the other must be left disabled.

To toggle the status of the HTTP server, type h in the User Interface Configuration Menu.

3.13.7 Access Control

The enhanced switch login process allows for multiple users to access the switch. There are three pre- defined (default) user names: root (with read-write access), readwrite (with read-write access), and readonly (with read-only access). Additionally, each user may be assigned their own login password (the default password for all users is Asante, and it is case-sensitive). Up to eight user names can be assigned, but only the user name root can add or delete users (see the following screen). Remote root login can be enabled/disabled in the Access Control Configuration Menu.

To access the Access Control Configuration Menu, enter the letter x from the User Interface Configuration Menu. Use the listed command letters to configure users, passwords, group membership, and remote login.

IntraCore	35160-T Access Control Configuration Menu
Remote Login: Enable
User Name:	Group Membership:
readonly	: read-only
readwrite	: read-write
<Cmd>	<Description>
a	Add User
d	Delete User
p	Change User Password

eEdit User Group Membership

i Group Information

t Toggle Remote Login

q Return to previous menu

root>

3.14 System Utilities

To access the System Utilities Menu, enter the letter s from the Configuration Menu. Use the listed command letters to configure port mirroring, system clock, system reset options, system log, bootstrap parameters, TFTP, and PING.

IntraCore 35160-T System Utility Menu

<Cmd> <Description>

mPort Mirroring Configuration

o System Clock Configuration

r System Reset Options

l System Log

b Bootstrap Configuration

t TFTP File Transfers

p PING Utility

q Return to previous menu

root>

39

Image 39

Asante Technologies 35160 user manual System Utilities, Enabling or Disabling the Web Server, Access Control

Contents

IntraCore 35160 Series Quick Start Guide IntraCore 35160 Series Layer 2 Gigabit Switches User’s Manual Table of Contents Page Introduction Features SwitchCore CXE2010 Package ContentsLEDs 2 IC35160-G 1 IC35160-T Front and Back Panel Descriptions Management and Configuration Console Interface Web-Based InterfaceSnmp Management Recommended Installation Tools Hardware Installation and SetupInstallation Overview Safety Overview Cooling and Airflow Installation into an Equipment RackPower Requirements Environmental Requirements Gbic Interfaces Installing a Gbic Gbic Care and Handling Installing the Optional Emergency Power SupplyConnecting Power Removing a Gbic 1 10/100/1000BaseT Ports Cabling Procedures Connecting to the Network Setup Gigabit Ethernet Ports Cabling ProceduresConnecting to a Console Connecting Via Telnet Connecting Via the Web Browser IP Assignment Changing the Password Simple Network Management Protocol Snmp Exiting a Submenu ConfigurationAccessing a Submenu Logging General Information Configuration Menu Changing System Administration Info Administration Configuration System IP Configuration Port ConfigurationChanging System IP Information Page Enabling or Disabling a Port Advanced Port Configuration Enabling or Disabling 802.3x Flow Control Setting Port Class of ServiceSetting Port Default Priority Setting Port Maximum Packet Length Global Port Configuration Unicast Forwarding Database Configuration Displaying the Forwarding Database Searching for a MAC Address Setting the MAC Address Age-Out TimeSecurity Management Vlan Management Protocol Configuration Snmp ConfigurationChanging Community Strings Adding or Updating a Trap Receiver Enabling Authentication Traps Deleting a Trap Receiver Spanning Tree Protocol STP Configuration Spanning Tree Port Configuration Setting Port Priority and Path CostEnabling and Disabling STP Trunk Group Configuration QoS Priority Queue Management Defining the Priority ListAssigning Packets to Priority Queues Example User Interface Configuration Setting Console UI Time-out PeriodSetting SSH/Telnet UI Time-out Change Password Adding or Deleting an Access HostEnabling or Disabling SSH and Telnet Access Control System UtilitiesEnabling or Disabling the Web Server Port Mirroring Enabling or Disabling System Port MirroringAdding or Deleting a Monitor Port System Reset Resetting the SwitchSystem Clock System Log Scheduling a System Reset Clearing the System Log Bootstrap Configuration Tftp File Transfers Ping Utility Statistics Advanced Management Snmp and Rmon ManagementRmon Management Viewing a List of Duplicated IP Addresses Duplicated IP Detection and TrapEnabling and Disabling Duplicated IP Detection Enabling and Disabling Duplicated IP Trap Enabling and Disabling Station Movement Trap Configuring Port Security Configuring Port Lock and Intruder Lock Configuring Port New Node Detection Trap Resetting Security to Defaults Port-based Network Access ControlConfiguring Security Level 2 or Level Setting the Intruder TrapPage Name Description Port Control Settings Setting Timers Setting Radius Parameters Radius Server IPServer Port Vlan Specifications for the IntraCore 35160 Series Other Vlan Features of the switchVlan Management Creating a Vlan Configuring Static Vlan Groups Advanced Static Vlan Configuration Adding and Deleting VLANs from the Port Configuring Vlan Port AttributesSetting the Port Vlan ID Configuring Port Receive Frame Type Displaying a Summary of Vlan Groups Setting Port Type Multicast Addresses Resetting Vlan Configuration to DefaultsIP Multicast Traffic Management Displaying a Vlan Port Summary Configuring IP Multicast Traffic Management Igmp SnoopingEnabling and Disabling Igmp Snooping Displaying a Summary of Group Addresses Advanced Igmp Configuration Removing a Multicast Group Address IP Multicast Forwarding Database ConfigurationAdding Ports to the Selected Address Inserting a Multicast Group Address Web-Based Management Accessing with a Web Browser Front Panel Button Genl Info General Information ButtonManagement Buttons Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp Button Vlan Configuration Vlan ButtonVlan Group Create Acceptable Frame Type Port ConfigurationSet Port Type Port Vlan ID Pvid Tag/Untag Port Egress Type Trunking ButtonSecurity Button Port Ingress FilteringPage Snmp Management Snmp Management OperationsSnmp Protocol Community Name and Security MIB TreeName Space Path MIB Groups Supported Vlan ID and Tagged Frames Switching ConceptsVLANs Port-Based VLANs Spanning Tree Parameters Spanning Tree ProtocolPort Vlan ID How It Works Spanning Tree Port Configuration Full Duplex, Flow Control, and Auto-negotiationFull Duplex Auto-Negotiation Flow Control Problem Possible Solutions Appendix A. Troubleshooting Appendix B. Features and Specifications SpecificationsPhysical Characteristics Technical Support and Warranty Environmental RangeStandards Compliance Appendix C. FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Page Appendix D. Console Port Pin Outs Pin Number Signal Name Appendix E. Online Warranty Registration Loading Software Locally Appendix F. BootP ConfigurationBootstrap Configuration Image Banks Loading Software Remotely BOOTP-TFTP