Scheduling a System Reset
The user can schedule the switch to automatically perform a reset from one second up to 24 hours (86,400 seconds) in advance.
To schedule a reset, use the following procedure:
1.Open the System Reset Menu by typing r in the System Utility Menu.
2.Type s to schedule a reset time (within the specified range).
3.Enter the number of seconds the switch will wait before it automatically resets. Important! The maximum number of seconds that can be entered is 86,400 (24 hours).
4.Press Enter. The switch will reset automatically after the number of seconds specified.
3.14.4 System Log
The switch’s system log records and displays any major system events on the switch, such as fatal errors, plugging in or removing a module, and so on.
To view the system log, use the following procedure:
1.Type l in the System Utility Menu. The System Log Menu appears, as shown below.
IntraCore
<Cmd> <Description>
lDisplay System Log
c Clear System Log
q Return to previous menu
root>
2.Type l in the System Log Menu to display the current system log.
The system log displays any major system events that have occurred on the switch. If no major events have occurred, “System up” messages are displayed.
IntraCore
==============================================================================
1.08/22/2002 12:53:30pm System up
2.08/22/2002 12:55:52pm System up
3.08/22/2002 02:38:50pm System up
4.08/22/2002 02:43:38pm System up
5.08/22/2002 02:47:21pm System up
6.08/22/2002 02:47:54pm Spanning Tree Task Disabled
7.08/22/2002 02:52:34pm System up
8.08/22/2002 02:55:37pm Primary Power unit failed !
9.08/22/2002 02:55:39pm Primary Power unit failed !
10.08/22/2002 02:55:41pm Primary Power unit failed !
11.08/22/2002 02:55:44pm Primary Power unit failed !
12.08/22/2002 02:55:46pm Primary Power unit failed !
13.08/22/2002 02:55:48pm Primary Power unit failed !
14.08/22/2002 02:55:51pm Primary Power unit failed !
15.08/22/2002 02:56:01pm Primary Power unit failed !
16.08/26/2002 09:20:02am System up
17.08/26/2002 09:23:42am Spanning Tree Task Enabled
18.08/26/2002 11:30:00am System up
19.08/26/2002 01:40:20pm System up
20.08/26/2002 01:46:00pm System up
End of system log, | Quit |
Note: The system log holds a maximum of 64 entries.
42
