Statistics, Ping Utility | Asante Technologies 35160 manual

3.14.7 PING Utility

Type p on the System Utility Menu to enter an IP address to Ping.

IntraCore 35160-T System Utility Menu

<Cmd> <Description>

mPort Mirroring Configuration

o System Clock Configuration

r System Reset Options

l System Log

b Bootstrap Configuration

t TFTP File Transfers

p PING Utility

q Return to previous menu

Enter IP Address (ddd.ddd.ddd.ddd)>

3.15 Statistics

Viewing statistics on a regular basis allows the manager to evaluate the network’s performance. The manager can view current statistics for the switch on a per-port basis and can change the view of those statistics and the counters displayed in it. To view statistics, enter the command letter s from the Main Menu to access the Port Statistics Counters screen. This screen displays the statistic counters for each port. Use the command letters p, s, or n to select the desired port.


IntraCore		35160-T Port Statistics Counters					Port: 1
Elapsed Time Since Up:				007:17:53:31
<Counter		Name>	<Total>	<Avg./s> <Counter Name>			<Total>	<Avg./s>
Total RX		Pkts	0	0	Total RX Bytes		0	0
Good Broadcast			0	0	Good Multicast		0	0
Total TX		Pkts	0	0	Total TX Bytes		0	0
TX Unicast			0	0	TX Non-unicast		0	0
Oversize		Pkts	0	0	CRCAlign Errors		0	0
Fragments			0	0	FCS Errors		0	0
Collisions			0	0	Late Events		0	0
64-Byte Pkts			0	0	65-127 Pkts		0	0
128-255 Pkts			0	0	256-511 Pkts		0	0
512-1023		Pkts	0	0	1024-1518	Pkts	0	0
<Cmd>	<Description>			<Cmd>	<Description>	<Cmd>	<Description>
r	since reset			p	prev port	n	next port
t	stop refresh			s	select port	q	quit

root>

1.Use the s command to select a port to see the counters, or use n and p to find the port.

2.Type t to stop the periodic updating of the counters, in order to record what they are at that time.

3.Type r to see a display of the same counters, but accrued since the last reset of the counters.

4.Type r in the “since reset” screen to reset the statistics counters in order to see them accrue again from zero.

5.Type q to quit either statistics screen and return to the Main Menu.

45

Image 45

Asante Technologies 35160 user manual Statistics, Ping Utility

Contents

IntraCore 35160 Series Quick Start Guide IntraCore 35160 Series Layer 2 Gigabit Switches User’s Manual Table of Contents Page Introduction Features SwitchCore CXE2010 Package ContentsLEDs 2 IC35160-G 1 IC35160-T Front and Back Panel Descriptions Management and Configuration Console Interface Web-Based InterfaceSnmp Management Installation Overview Hardware Installation and SetupSafety Overview Recommended Installation Tools Power Requirements Installation into an Equipment RackEnvironmental Requirements Cooling and Airflow Gbic Interfaces Installing a Gbic Connecting Power Installing the Optional Emergency Power SupplyRemoving a Gbic Gbic Care and Handling 1 10/100/1000BaseT Ports Cabling Procedures Connecting to the Network Setup Gigabit Ethernet Ports Cabling ProceduresConnecting to a Console Connecting Via Telnet Connecting Via the Web Browser IP Assignment Changing the Password Simple Network Management Protocol Snmp Accessing a Submenu ConfigurationLogging Exiting a Submenu General Information Configuration Menu Changing System Administration Info Administration Configuration System IP Configuration Port ConfigurationChanging System IP Information Page Enabling or Disabling a Port Advanced Port Configuration Setting Port Default Priority Setting Port Class of ServiceSetting Port Maximum Packet Length Enabling or Disabling 802.3x Flow Control Global Port Configuration Unicast Forwarding Database Configuration Displaying the Forwarding Database Security Management Setting the MAC Address Age-Out TimeVlan Management Searching for a MAC Address Protocol Configuration Snmp ConfigurationChanging Community Strings Adding or Updating a Trap Receiver Enabling Authentication Traps Deleting a Trap Receiver Spanning Tree Protocol STP Configuration Spanning Tree Port Configuration Setting Port Priority and Path CostEnabling and Disabling STP Trunk Group Configuration QoS Priority Queue Management Defining the Priority ListAssigning Packets to Priority Queues Example User Interface Configuration Setting Console UI Time-out PeriodSetting SSH/Telnet UI Time-out Change Password Adding or Deleting an Access HostEnabling or Disabling SSH and Telnet Access Control System UtilitiesEnabling or Disabling the Web Server Port Mirroring Enabling or Disabling System Port MirroringAdding or Deleting a Monitor Port System Reset Resetting the SwitchSystem Clock System Log Scheduling a System Reset Clearing the System Log Bootstrap Configuration Tftp File Transfers Ping Utility Statistics Advanced Management Snmp and Rmon ManagementRmon Management Enabling and Disabling Duplicated IP Detection Duplicated IP Detection and TrapEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP Addresses Enabling and Disabling Station Movement Trap Configuring Port Security Configuring Port Lock and Intruder Lock Configuring Port New Node Detection Trap Configuring Security Level 2 or Level Port-based Network Access ControlSetting the Intruder Trap Resetting Security to DefaultsPage Name Description Port Control Settings Setting Timers Setting Radius Parameters Radius Server IPServer Port Vlan Specifications for the IntraCore 35160 Series Other Vlan Features of the switchVlan Management Creating a Vlan Configuring Static Vlan Groups Advanced Static Vlan Configuration Setting the Port Vlan ID Configuring Vlan Port AttributesConfiguring Port Receive Frame Type Adding and Deleting VLANs from the Port Displaying a Summary of Vlan Groups Setting Port Type IP Multicast Traffic Management Resetting Vlan Configuration to DefaultsDisplaying a Vlan Port Summary Multicast Addresses Configuring IP Multicast Traffic Management Igmp SnoopingEnabling and Disabling Igmp Snooping Displaying a Summary of Group Addresses Advanced Igmp Configuration Adding Ports to the Selected Address IP Multicast Forwarding Database ConfigurationInserting a Multicast Group Address Removing a Multicast Group Address Web-Based Management Accessing with a Web Browser Front Panel Button Genl Info General Information ButtonManagement Buttons Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp Button Vlan Configuration Vlan ButtonVlan Group Create Set Port Type Port ConfigurationPort Vlan ID Pvid Acceptable Frame Type Security Button Trunking ButtonPort Ingress Filtering Tag/Untag Port Egress TypePage Snmp Management Snmp Management OperationsSnmp Protocol Community Name and Security MIB TreeName Space Path MIB Groups Supported VLANs Switching ConceptsPort-Based VLANs Vlan ID and Tagged Frames Port Vlan ID Spanning Tree ProtocolHow It Works Spanning Tree Parameters Spanning Tree Port Configuration Full Duplex, Flow Control, and Auto-negotiationFull Duplex Auto-Negotiation Flow Control Problem Possible Solutions Appendix A. Troubleshooting Appendix B. Features and Specifications SpecificationsPhysical Characteristics Technical Support and Warranty Environmental RangeStandards Compliance Appendix C. FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Page Appendix D. Console Port Pin Outs Pin Number Signal Name Appendix E. Online Warranty Registration Bootstrap Configuration Appendix F. BootP ConfigurationImage Banks Loading Software Locally Loading Software Remotely BOOTP-TFTP