1 IC35160-T, 2 IC35160-G | Asante Technologies specs

1.4.1 IC35160-T

The IC35160-T has one power LED indicator, one (optional) emergency power LED, and two LED indicators for each of the 16 ports. See the table below for a complete LED description.

LED	Color	Description

Power	Green	Power is on.
	Off	Power is off, or main power has failed.
Emergency	Green	Primary power has failed and optional power supply is powering the switch.
Power (optional)	Off	Optional power supply is in standby mode and primary power is working.
	Off
Link/Speed	Green	A valid 1000Mbps link has been established.
	Yellow	A valid 10/100Mbps link has been established.
	Off	No link has been established.
Duplex/Activity	Green	Activity has been detected in 1000Mbps.
	Blinking Yellow	Activity has been established in 10/100Mbps.
	Off	No link has been established.

1.4.2 IC35160-G

The IntraCore 35160-G has one power LED, one (optional) emergency power LED, two LED indicators for 10/100/1000BaseT status, and one LED for GBIC status. See the table below for a complete LED description.

LED	Color	Description

Power	Green	Power is on.
	Off	Power is off, or main power supply has failed.
Emergency Power	Green	Primary power has failed and optional power supply is powering the switch.
(optional)	Off	Optional power supply is in standby mode and primary power is working.
	Off
BaseT10/100/1000	Green	A valid 1000Mbps link has been established.
Link/Activity	Blinking Green	Traffic is detected at 1000Mbps.
	Blinking Green	Traffic is detected at 1000Mbps.
	Yellow	A valid 10 or 100Mbps link has been established.
	Blinking Yellow	Traffic is detected at 10 or 100Mbps.
	Off	No link has been established.
BaseT 10/100/1000	Green	A full-duplex link has established.
Duplex	Yellow	A half-duplex link has been established.
	Yellow	A half-duplex link has been established.
	Blinking Yellow	A half-duplex link has been established, and there are collisions being detected.
	Off	No link has been established.
GBIC	Green	A valid 1000Mbps link has been established.
Link	Off	No link has been established.
	Off	No link has been established.

8

Image 8

Asante Technologies user manual 1 IC35160-T, 2 IC35160-G

Contents

IntraCore 35160 Series Quick Start Guide Layer 2 Gigabit Switches User’s Manual IntraCore 35160 Series Table of Contents Page Features Introduction LEDs SwitchCore CXE2010Package Contents 1 IC35160-T 2 IC35160-G Management and Configuration Front and Back Panel Descriptions Snmp Management Console InterfaceWeb-Based Interface Hardware Installation and Setup Installation OverviewSafety Overview Recommended Installation Tools Installation into an Equipment Rack Power RequirementsEnvironmental Requirements Cooling and Airflow Installing a Gbic Gbic Interfaces Installing the Optional Emergency Power Supply Connecting PowerRemoving a Gbic Gbic Care and Handling Connecting to the Network 1 10/100/1000BaseT Ports Cabling Procedures Connecting to a Console SetupGigabit Ethernet Ports Cabling Procedures Connecting Via the Web Browser Connecting Via Telnet Changing the Password IP Assignment Simple Network Management Protocol Snmp Configuration Accessing a SubmenuLogging Exiting a Submenu Configuration Menu General Information Administration Configuration Changing System Administration Info Changing System IP Information System IP ConfigurationPort Configuration Page Advanced Port Configuration Enabling or Disabling a Port Setting Port Class of Service Setting Port Default PrioritySetting Port Maximum Packet Length Enabling or Disabling 802.3x Flow Control Unicast Forwarding Database Configuration Global Port Configuration Displaying the Forwarding Database Setting the MAC Address Age-Out Time Security ManagementVlan Management Searching for a MAC Address Changing Community Strings Protocol ConfigurationSnmp Configuration Enabling Authentication Traps Adding or Updating a Trap Receiver Spanning Tree Protocol STP Configuration Deleting a Trap Receiver Enabling and Disabling STP Spanning Tree Port ConfigurationSetting Port Priority and Path Cost Trunk Group Configuration Assigning Packets to Priority Queues QoS Priority Queue ManagementDefining the Priority List Example Setting SSH/Telnet UI Time-out User Interface ConfigurationSetting Console UI Time-out Period Enabling or Disabling SSH and Telnet Change PasswordAdding or Deleting an Access Host Enabling or Disabling the Web Server Access ControlSystem Utilities Adding or Deleting a Monitor Port Port MirroringEnabling or Disabling System Port Mirroring System Clock System ResetResetting the Switch Scheduling a System Reset System Log Bootstrap Configuration Clearing the System Log Tftp File Transfers Statistics Ping Utility Rmon Management Advanced ManagementSnmp and Rmon Management Duplicated IP Detection and Trap Enabling and Disabling Duplicated IP DetectionEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP Addresses Configuring Port Security Enabling and Disabling Station Movement Trap Configuring Port New Node Detection Trap Configuring Port Lock and Intruder Lock Port-based Network Access Control Configuring Security Level 2 or LevelSetting the Intruder Trap Resetting Security to DefaultsPage Port Control Settings Name Description Setting Timers Server Port Setting Radius ParametersRadius Server IP Vlan Management Vlan Specifications for the IntraCore 35160 SeriesOther Vlan Features of the switch Configuring Static Vlan Groups Creating a Vlan Advanced Static Vlan Configuration Configuring Vlan Port Attributes Setting the Port Vlan IDConfiguring Port Receive Frame Type Adding and Deleting VLANs from the Port Setting Port Type Displaying a Summary of Vlan Groups Resetting Vlan Configuration to Defaults IP Multicast Traffic ManagementDisplaying a Vlan Port Summary Multicast Addresses Enabling and Disabling Igmp Snooping Configuring IP Multicast Traffic ManagementIgmp Snooping Advanced Igmp Configuration Displaying a Summary of Group Addresses IP Multicast Forwarding Database Configuration Adding Ports to the Selected AddressInserting a Multicast Group Address Removing a Multicast Group Address Accessing with a Web Browser Web-Based Management Management Buttons Front Panel ButtonGenl Info General Information Button Port Config Port Configuration Button Span Tree Spanning Tree Button Snmp Button Addr Address Table Button Vlan Group Create Vlan ConfigurationVlan Button Port Configuration Set Port TypePort Vlan ID Pvid Acceptable Frame Type Trunking Button Security ButtonPort Ingress Filtering Tag/Untag Port Egress TypePage Snmp Protocol Snmp ManagementSnmp Management Operations Name Space Path Community Name and SecurityMIB Tree MIB Groups Supported Switching Concepts VLANsPort-Based VLANs Vlan ID and Tagged Frames Spanning Tree Protocol Port Vlan IDHow It Works Spanning Tree Parameters Full Duplex Spanning Tree Port ConfigurationFull Duplex, Flow Control, and Auto-negotiation Flow Control Auto-Negotiation Appendix A. Troubleshooting Problem Possible Solutions Physical Characteristics Appendix B. Features and SpecificationsSpecifications Standards Compliance Technical Support and WarrantyEnvironmental Range IntraCare Warranty Statement Appendix C. FCC Compliance and Warranty StatementsFCC Compliance Statement Important Safety Instructions Page Pin Number Signal Name Appendix D. Console Port Pin Outs Appendix E. Online Warranty Registration Appendix F. BootP Configuration Bootstrap ConfigurationImage Banks Loading Software Locally BOOTP-TFTP Loading Software Remotely