Shindaiwa 82051 Install Blower Pipes, Assembly, blower application, Operation, fuel, English

Assembly

WARNING

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

blower application

Install Blower Pipes

1.Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing.

2.Turn straight pipe clockwise to lock into place.

3.Align grooves in fan head nozzle with pegs on straight pipe and slide fan head nozzle onto straight pipe.

4.Turn fan head nozzle clockwise to lock into place.

Operation

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

fuel

WARNING

Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

English