20 Chapter 1 Power Management
Power Saving Mode Phenomenon
Standby Mode
Waiting time spec ified by the System
Standby value or the operating system
elapses without an y system activity.
Or
When the computer is about to enter
Hibernation mode (e. g., during a battery-l ow
condition), but the Hibernation file is invalid
or not present.
The buzzer beeps
The Sleep indicator li ghts up
Hibernation Mode
When customized functions for power
management are set to Hibernation and the
corresponding act ion is taken.
All power shuts off
Display Standby Mode
Keyboard, built-in touc hpad, and an external
PS/2 pointing device are idle for a specified
period.
The display shuts off
Hard Disk Standby Mode
Hard disk is idle withi n a specified peri od of
time.
Hard disk drive is in standby mo de.
(spindle turned-off)
Environmental Requirements
Item Specification
Temperature
Operating +5~+35 °C
Non-operating -20~+60 °C
Non-operating -20~+60 ° C (storage package)
Humidity
Operating 20% to 80% RH, non-condensing
Non-operating 20% to 90% RH, non-condensing (unpacked)
Non-operating 20% to 90% RH, non-condensing (stor age package)
Vibration
Operating (unpacke d) 5~25 .6Hz: 0.38mm (peak to peak)
25.6~250Hz: 0.5G
Non-operating (unpa cked) 5~27.1Hz: 0.6G
27.1Hz~50Hz: 0.41mm (peak to peak)
50~500Hz: 2.0G
Non-operating (pack ed) 5~62 .6Hz: 0.51mm (peak to peak)
62.6~500Hz: 4G
Mechanical Specification
Item Specification
Dimensions 320.5(W) x 256/26 0(D) x 36(H)mm for 14.1” TFT
324.7 (W) x 268.55 (D) x 47.55(H) turtle shell for 15.1” TFT
Weight 6.9 lbs for 14.1” TFT
730sg-1.book Page 20 Wedn e sd a y, D e c emb er 1, 1999 6:03 PM