10
WarningAbout Excessive Amplifier Distortion:
Operating a receiver (of any power rating) beyond its
maximum undistorted output level creates distortion –
addedhigh frequency sound not part of the musical program.
Distortion dramatically increases the internal operating tem-
perature of a speaker and will eventually cause the speak-
er’s failure due to burned or melted internal parts. While
Cambridge SoundWorks includes the most heat-tolerant
parts commensurate with good acoustic design, the
speaker’s Limited Warranty against defects in materials or
workmanship does not apply to parts that fail from long-
term operation at very high temperatures.
Enclosure Cleaning
The speaker enclosures can be cleaned with a soft, damp
cloth or mild cleaner.
Brush or vacuum the grille panels with a soft brush
attachment to your vacuum cleaner.
Specifications
Dimensions: 25-3/8" H x 7-1/8" W x 3-15/16" D
Weight: 14-1/2 pounds each
Impedance: nominal 8 ohms
Recommended amplifier power range: 20W – 100W RMS
per channel.
Frequency Range: 80Hz – 24kHz.
WooferType: 4 x 3-1/2" with co-injection molded composite
cones and butyl-rubber surrounds.
TweeterType: 1/2" aluminum dome with ferrofluid-damping
and neodymium magnet.
Crossover: 2-1/2 way,series-connected with selectable
wall-mounting compensation.
Enclosure: High-density pressure-cast aluminum with
molded-composite baffle.
SPECIFICATIONS

2a

2b

1

1/4"
BRAND
AF6TM ALLIGATOR®

Solid-Wall Anchors

Drill1/4" diameter hole — minimum hole
depth11/2". Insert anchor and tap flush.
Placeitem over anchor. Insert screw and
tightenflush. For best results use screw
gunfor installation in solid walls.
Inwalls of minimum thickness 3/8",
screw opens anchor and locks securely.
Patented under U.S. Patent Nos. 4,752,170 and
5,161,296;and foreign counterparts thereof.
Otherpatents pending. TOGGLER and typeface,
andALLIGATOR are worldwide registered
trademarks of Mechanical Plastics Corp.
©2002 MPC
®
Appendix