Chauvet Home Safety Product Operating Instructions, Using the Control Panel, Menu Map, Mode, Esc

4.OPERATING INSTRUCTIONS

Using the Control Panel

Access control panel functions using the four buttons located directly underneath the LED display.

BUTTON	FUNCTION
<MODE/	Used to scroll through the current
	operating mode, as well as back
ESC>
	out of the current menu option
<DOWN>	Used to select a decreasing value
<UP>	Used to select an increasing
	value
<ENTER>	Used to activate a selection and
	store it to memory

Menu Map

Mode		Programming			Description
DMX Mode	Addr			d001~d512	Selects the DMX starting address
				NO	The Slave fixture follows the actions of
Slave					the Master fixture
	SLAU		H-
Operation
				YES	The Slave fixture mirrors the actions of
					the Master fixture
Sound-active	SoUd			rUn	Triggers the built-in program to the beat
					of the music, using the internal
					microphone
				P-_1~10	Selects one of the built-in programs
Automatic	P-
				S 01~S100	Adjusts the speed of the automatic
					program

Configuring the Starting Address

The Sweeper™ LED fixture uses up to eight DMX channels. In this DMX configuration/personality, the highest configurable address is 505. Any address higher than this will prevent access to all of the channels while in this mode; however, if you desire to use one of the other DMX configurations (personalities), please consider the total DMX channels when selecting a DMX address.

If this is your first time using DMX, we recommend reading the “DMX Primer” section in the “Appendix”.

4. Operating Instructions 8 1/12/2011 11:51 AM