You see the Identity page.
2.From the Identity page, complete entries for the following, noting that the description and location help you identify where modules are in the facility.
•Host Name - the name a Domain Name Server uses to resolve this adapter’s IP address
•Module Description
•Module Location
•Chassis Size - the value that shows the number of POINT I/O mdoules plus the adapter. This value must match the number of I/O modules plus one for the adapter before any I/O connections are allowed.
3.From the Identity page, click Apply Changes to save the modified values.
Use the Network Configuration Page
To use the Network Configuration page to make entries for enabling or disabling DHCP and setting TCP/IP parameters and Ethernet link operation, follow this procedure.
1.From the Web page, click Network from the tab at the top of the page or panel on the left.
