A-10Adapter Web Pages

Work with the Configuration Pages

3.From the Diagnostic Messaging page, click Submit to see values similar to that in the figure.

To work with the Configuration pages, follow these procedures, noting that values on these pages are stored in and retrieved from non-volatile memory.

IMPORTANT

The values on these pages are in non-volatile memory. Changes to these parameters do not take effect until you reset or cycle power th the 1734-AENT adapter.

IMPORTANT

If you set the thumbwheels on the 1734-AENT adapter to the value 888 and then power cycle the module, the following occurs:

The DHCP Enabled function is enabled (set to True).

The Ethernet link is negotiated automatically. The Auto Negotiate function is set to True.

The Web server is enabled. The Disabled Web Server function is disabled.

The password for this page resets to the factory default. The word password is the factory default password.

Note the value of the switches before you enter the 888 value because you return the adapter to those values once this process is complete.

Publication 1734-UM011C-EN-P - January 2006

Page 100
Image 100
Bradley Smoker 1734-AENT manual Work with the Configuration Pages