Adapter Web Pages | |
|
|
Work with the Diagnostics Pages
3.From the Home page, complete one of these, as desired.
•Click one of these to go to http://www.ab.com/.
–
–Visit AB.com for additional information statement under Resources
•Click Rockwell Automation at the top right to go to http://www.rockwellautomation.com/.
•Click these to see additional diagnostics Web pages.
–Diagnostics - Diagnostic overview, Network Settings, Ethernet Statistics, I/O Connections, Diagnostic messaging
–Configuration - Identity, Network, Services
–Browse chassis
To work with the Diagnostics options, follow these procedures.
1.From the Home page, click Diagnostics or Expand to see the following diagnostics options from the panel at the left.
•Diagnostic overview
•Network settings
•Ethernet statistics
•I/O connections
•Diagnostic messaging
Click tabs to see the corresponding page.
Click from this panel to see the corresponding page.
2.From from the top of the page, as shown in the figure, if desired, type a refresh rate, noting that the default is 15 seconds.
3.From the panel at the left or tabs at the top of the page, as shown in the figure, click one of the diagnostics options to see the corresponding page.
Type a refresh rate.
