Bradley Smoker 1734-AENT manual Configure the I/O

4-4Configure the Adapter for Direct Connection in RSLogix 5000 Software

Configure the I/O

You now add the POINT I/O modules to the controller’s I/O configuration performing these procedures.

•Add the local 1756-ENBT module to the I/O configuration.

•Add the 1734-AENT adapter as a child of the 1756-ENBT module.

•Add the I/O modules as children of the 1734-AENT adapter.

	Click the Help buttons on the configuration
IMPORTANT
	dialogs shown in this section if you need
	assistance in selecting and setting the parameters.

Add the Local EtherNet/IP Bridge to the I/O Configuration

1.Select the I/O Configuration folder in the project dialog, and click the right mouse button.

A dialog opens.

2.Click New Module.

Publication 1734-UM011C-EN-P - January 2006