Bradley Smoker 1734-AENT manual Add the Point I/O Modules to the I/O Configuration

4-10Configure the Adapter for Direct Connection in RSLogix 5000 Software

Add the POINT I/O Modules to the I/O Configuration

You now add POINT I/O modules to the I/O Configuration List under the 1734-AENT adapter.

In this example, you add a 1734-OW2 relay output and a 1734-OV4E sink output module with standard configurations. Use these steps as a guide when configuring different I/O modules for your system.

TIP

This example application uses the I/O modules default configurations. For more information, see the POINT I/O Selection Guide, publication no.

1734-SG001.

Add the Relay Output Module

1.Right-click the remote 1734-AENT adapter under the I/O Configuration folder and select New Module.

Publication 1734-UM011C-EN-P - January 2006