5-4Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software

5.Complete the Create In entry by selecting the folder where you want to save the RSLogix 5000 file.

6.To use redundancy in your system, check the Redundancy Enabled checkbox so that a checkmark appears.

RSLogix 5000 software, version 11 and later, includes enable redundancy. This example does not use redundancy.

7.Click OK.

Configure the I/O Modules You now add the POINT I/O modules to the controller I/O configuration. To do this, first add the local 1756-ENBT module to the

I/O configuration. Next add the 1734-AENT adapter as a child of the 1756-ENBT module. Then add the I/O modules as children of the 1734-AENT adapter.

IMPORTANT

Click the Help buttons on the configuration dialog shown in this section if you need assistance in selecting and setting the parameters.

Add the Local EtherNet/IP Bridge to the I/O Configuration

1.Select the I/O Configuration folder in the project dialog, and click the right mouse button.

A dialog opens.

Publication 1734-UM011C-EN-P - January 2006

Page 70
Image 70
Bradley Smoker 1734-AENT manual Add the Local EtherNet/IP Bridge to the I/O Configuration