Configure the Adapter for Your EtherNet/IP Network | |
|
|
3.Enter the IP Address you want to assign to the device, and click OK.
The device is added to the Relation List, displaying the Ethernet
Address (MAC) and corresponding IP Address, Hostname, and
Description (if applicable).
When the address displays in the IP Address column in the Request History section, it signifies that the IP address assignment has been made.
4.To assign this configuration to the device, highlight the device in the Relation List panel, and click the Disable BOOTP/DHCP button.
When power is cycled to the device, it uses the configuration you assigned and not issue a DHCP request.
Publication
