Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software | |
|
|
Download the Program to the Controller
9.Keep the following unchecked.
•Inhibit Module
•Major Fault on Controller If Connection fails While in Run Mode
10.Click OK.
11.Choose File>Save and enter the name and location of the RSLogix 5000 file.
Follow this procedure to download the program we just saved to the ControlLogix controller.
1.From the main menu, choose
2.From the Who Active dialog, navigate to select the slot where the controller is located in the chassis.
3.Choose Set Project Path.
4.Choose Download.
