Configure the Adapter for Direct Connection in RSLogix 5000 Software | |
|
|
The New Module dialog opens.
Comm Format choices are the following.
•None = the adapter makes a direct connection to each of the modules referenced by the data.
•Rack optimization = digital I/O data is collected into a rack image. This does not include analog or specialty I/O modules.
•Listen only - rack optimization = read or verify data only, but does not control the modules (when you have multiple controllers - one controller is used to control and the other controllers are used to monitor).
4.Choose None as Comm Format, because we are making a direct connection, and click OK.
Because you entered None as the Comm Format, the requested packet interval (RPI) is disabled.
The
