Bradley Smoker 1734-AENT manual Quick Start, Necessary Prerequisites

Appendix D

What This Appendix Contains

Quick Start

In this quick start, you learn how to use the 1734-AENT adapter with a ControlLogix controller for EtherNet/IP systems.

	This quick start contains a simple set of steps and
IMPORTANT
	reminders that will help you avoid errors when you
	are configuring your POINT I/O system for and
	EtherNet/IP network.
	You must use series C POINT I/O modules with
ATTENTION
	the 1734-AENT adapter. Series A or B POINT I/O
	modules will not work with this adapter.

Necessary Prerequisites

Before you begin this quick start, make sure the following conditions are in place.

•The ControlLogix controller and RSLogix software version must be version 11 or later.

•The 1756-ENBT module must be revision 2.3 or later.

•The 1734 POINT I/O modules must be series C (except for the 1734-232ASC modules, which can be series A).

•The recommended RPIs are being used: Digital = 10 ms or higher, Analog and Specialty = 50 ms or higher.

•The 1734-AENT POINT I/O adapter is a child to a local 1756-ENBT module.

Publication 1734-UM011C-EN-P - January 2006