4-22Configure the Adapter for Direct Connection in RSLogix 5000 Software

Configure the Adapter with Fixed IP Address

8.Click OK to continue.

Notice the chassis size in the module is modified to 3.

9.Click OK.

At this point, your POINTBus status LED should be solid green. All the yellow triangles in your I/O configuration should be gone.

To configure the 1734-AENT adapter with a fixed IP address to prevent the adapter from ceasing to communicate with the ControlLogix controller:

1.Click the Port Configuration tab in the 1734-AENT adapter properties dialog.

Publication 1734-UM011C-EN-P - January 2006

Page 64
Image 64
Bradley Smoker 1734-AENT manual Configure the Adapter with Fixed IP Address