Bradley Smoker 1734-AENT manual =Input is Off, =Module is not Running, =Count not Decreasing

1734 POINT I/O Module/RSLogix 5000 Controller Tag Reference C-35

1734-SSI

1 Channel Synchronous Serial Interface

Input Data	Data Type	Default	Valid Data Values
		Value
Present Data	DINT	0	-2,147,483,648…2,147,483,647
			(0…4,294,967,295)
Latched Data	DINT	0	-2,147,483,648…2,147,483,647
			(0…4,294,967,295)
Status	INT	0	0=Input is Off
Input Status	BIT 0
			1=Input is On
Run	BIT 1		0=Module is not Running
			1=Module is Running
Decreasing Count	BIT 2		0=Count not Decreasing
			1=Count is Decreasing
Increasing Count	BIT 3		0=Count not Increasing
			1=Count is Increasing
Compare0 Reached	BIT 4		0=Compare not Reached
Compare1 Reached	BIT 5		1=Compare was Reached
Compare0 Status	BIT 6		0=Compare Off
Compare1 Status	BIT 7		1=Compare On
Power Fault	BIT 8		0=No 24Vdc Power Fault
			1=24Vdc Power Fault
Configuration Fault	BIT 9		0=No FPGA Config Fault
			1=FPGA Config data bad
Communication Fault	BIT 10		0=No FPGA Comm Fault
			1=FPGA Comm Fault
Input Data Fault	BIT 11		0=No Input Data Fault
			1=Input Power Fault (short)
Data Latched	BIT 12		0=Input Data Not Latched
			1=Input Data Latched

Present / Latched Data

To interpret values from -2,147,483,648 to -1, use this conversion formula:

Stored Data Tag Value + 4,294,967,296 = Actual Stored Data Tag Value.

As an example, for a read value of -1,794,967,296:

-1,794,967,296 + 4,294,967,296 = 2,500,000,000 actual value

Publication 1734-UM011C-EN-P - January 2006