Use the controller tags in your ladder program to read input data or write output data.
•For RSLogix 5000 programming instructions, refer to RSLogix 5000 Getting Results, publication
•For ControlLogix controller information, refer to ControlLogix System User Manual, publication
•Slot Status Bits: The Slot Status bits display the connection status for each of the POINT I/O modules that use a
–Bit 0 is reserved for the adapter and always reports a value of 1.
–Each of the other bits (1 to 63) correspond to a POINT I/O module that you install in the POINT I/O backplane.
–In this example, we configured the
The slot status bits indicate that we installed the module in slot 2 with it operating correctly:
•0=module participating with no errors and
•1=module not participating or connection error (typically, module removed/missing)
