Zebra Technologies ZT400 manual Limitations and Requirements Many mobile devices can

		Printer Setup and Operation
		Select a Communication Interface
	Table 2 • Communication Interfaces
Interface	Standard or	Description
	Option
Bluetooth®	Standard	Limitations and Requirements Many mobile devices can
		communicate with the printer within a 10-foot radius of the
		printer.
		Connections and Configuration Refer to the Zebra
		Bluetooth User Guide for specific instructions for configuring
		your printer to use a Bluetooth interface. A copy of this manual is
		available at http://www.zebra.com/manuals.
RS-232 Serial	Standard	Limitations and Requirements
		• Maximum cable length of 50 ft (15.24 m).
		• You may need to change printer parameters to match the host
		computer.
		• You need to use a null-modem adaptor to connect to the printer
		if using a standard modem cable.
		Connections and Configuration The baud rate, number of
		data and stop bits, the parity, and the XON/XOFF or DTR control
		must match those of the host computer.
USB	Standard	Limitations and Requirements
		• Maximum cable length of 16.4 ft (5 m).
		• No printer parameter changes required to match the host
		computer.
		Connections and Configuration No additional
		configuration is necessary.
Wired Ethernet print	Standard	Limitations and Requirements
server		• Can print to the printer from any computer on your LAN.
		• Can communicate with the printer through the printer’s web
		pages.
		• The printer must be configured to use your LAN.
		• A parallel connection or a wireless print server (if installed)
		takes up this port on the printer.
		Caution • Be careful not to plug a USB cable into a wired
		Ethernet print server connector on the printer because doing so
		will damage the Ethernet connector.
		Connections and Configuration Refer to the ZebraNet
		Wired and Wireless Print Servers User Guide for configuration
		instructions. A copy of this manual is available at
		http://www.zebra.com/manuals.
		Note • To use this connection, you may need to remove a
		factory-installed plug that is designed to keep someone
		from accidentally plugging a USB connector into this port.

25

4/8/14 ZT400 Series™ User Guide P1066582-002