Zebra Technologies ZT400 Network Menu, 102, View the Active Print Server, Set the Subnet Mask

102

Printer Configuration and Adjustment

User Menus—NETWORK Menu

NETWORK Menu

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 3, Network Settings on page 77. For more information about print servers and how they function, refer to the Wired and Wireless Print Server User Guide. A copy of this manual is available at http://www.zebra.com/manuals.

ACTIVE PRINT SERVER

INTERNAL WIRED

PRIMARY NETWORK

WIRED

WIRED IP ADDRESS

▼ 000.000.000.000 ▲

NEXT

View the Active Print Server

Only one print server (wired or wireless) can be installed at a time. Therefore, the print server installed is the active print server.

View the Active Print Server

Only one print server (wired or wireless) can be installed at a time. Therefore, the print server installed is the active print server.

Set the Printer’s IP Address

View and, if necessary, change the printer’s IP address.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See IP Address on page 77 for more information.

WIRED SUBNET MASK

▼ 000.000.000.000 ▲

NEXT

Set the Subnet Mask

View and, if necessary, change the subnet mask.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See Subnet Mask on page 77 for more information.

P1066582-002 ZT400 Series™ User Guide 4/8/14