Zebra Technologies ZT400 manual Final Steps for Tear-Off Mode, Load the Ribbon on

40

Printer Setup and Operation

Load the Media—Tear-Off Mode

Final Steps for Tear-Off Mode

1.Slide in the media guide until it just touches the edge of the media.

2.Rotate the printhead-open lever (1) downward until it locks the printhead in place.

1

3.Does the media that you are using require ribbon for printing? If you are not sure, see When to Use Ribbon on page 18.

If using…	Then…
Direct Thermal media (no ribbon needed)	Continue with step 4.
Thermal Transfer media (ribbon needed)	a.	If you have not already done so,
		load ribbon in the printer. See
		Load the Ribbon on page 60.
	b. Continue with step 4.

P1066582-002 ZT400 Series™ User Guide 4/8/14