Zebra Technologies ZT400 manual Rfid Settings

80

Printer Configuration and Adjustment

Adjust Printer Settings

RFID Settings

Table 4 • RFID Settings

RFID Status	Display the status of the RFID subsystem of the printer.
	Accepted values:	N/A
	Related ZPL command(s):	^HL or ~HL
	SGD command used:	rfid.error.response
	User menu item:	RFID STATUS on page 108
	Printer web page:	N/A
Read RFID Data	Read and return the specified tag data from the RFID tag located over the RFID
	antenna. No printer movement occurs while tag data is being read. The printhead can be
	open or closed.
	Accepted values:	epc = reads the first 128 bits of EPC data
		tid information = reads the first 32 bits of the
		TID (Tag ID)
		password status = reads the tag’s access and kill
		passwords
		protocol bits = reads the protocol bits from the
		EPC memory banks and converts that value to
		the EPC size
		memory bank sizes = reads the EPC, TID, and
		user memory banks sizes
	Related ZPL command(s):	^RF
	SGD command used:	rfid.tag.read.content and
		rfid.tag.read.execute
	User menu item:	READ RFID DATA on page 108
	Printer web page:	N/A
RFID Test	During the RFID test, the printer attempts to read and write to a transponder. No printer
	movement occurs with this test.
	Accepted values:	quick = performs a read EPC test and a write EPC
		test (using random data)
		read = performs a read EPC test
		write = performs a write EPC test (using random
		data)
	Related ZPL command(s):	N/A
	SGD command used:	rfid.tag.test.content and
		rfid.tag.test.execute
	User menu item:	RFID TEST on page 109
	Printer web page:	N/A

P1066582-002 ZT400 Series™ User Guide 4/8/14