Zebra Technologies ZT400 manual Feed the liner under the media Alignment roller

Printer Setup and Operation

Load the Media—Peel-Off Mode (with our without Liner Take-Up)

5.Complete this step only if you want to use Peel-Off mode with Liner Take-Up. Your printer must have the Liner Take-Up option or the Rewind option installed. Follow the instructions for your printer option. If you are not using Liner Take-Up, continue with step 6.

5-a.Thread the liner into the slot below the peel assembly.

45

Rewind Option

5-b.Feed the liner under the media

alignment roller (1).

1

Liner Take-Up Option

Slide the liner into the slot in the liner take-up spindle (1).

1

4/8/14 ZT400 Series™ User Guide P1066582-002