Zebra Technologies ZT400 Remove Used Ribbon, 128, To remove used ribbon, complete these steps

128

Printer Configuration and Adjustment

Remove Used Ribbon

Remove Used Ribbon

Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.

To remove used ribbon, complete these steps:

1.Has the ribbon run out?

If the ribbon...	Then
Ran out	Continue with the next step.
Did not run out	Cut or break the ribbon before the ribbon take-up spindle.

Caution • Do not cut the ribbon directly on the ribbon take-up spindle. Doing so may damage the spindle.

2.While holding the ribbon take-up spindle, turn the ribbon release knob to the left until it stops.

The ribbon release bars pivot down, easing the spindle’s grip on the used ribbon.

3.Slide the used ribbon off of the ribbon take-up spindle and discard.

P1066582-002 ZT400 Series™ User Guide 4/8/14