Zebra Technologies ZT400 manual 103

Printer Configuration and Adjustment

User Menus—NETWORK Menu

103

	WIRED GATEWAY
▼	000.000.000.000	▲
		NEXT
	WIRED IP PROTOCOL
▼	all	▲

WIRED MAC ADDRESS

00:05:9A:3C:78:00

IP PORT

6101

IP ALTERNATE PORT

9100

Set the Default Gateway

View and, if necessary, change the default gateway.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See Gateway on page 77 for more information.

Set the IP Resolution Method

This parameter tells if the user (permanent) or the server (dynamic) selects the IP address. When a dynamic option is chosen, this parameter tells the method(s) by which the wired or wireless print server receives the IP address from the server.

See IP Protocol on page 78 for more information.

View the MAC Address

View the Media Access Control (MAC) address of the print server that is installed in the printer (wired or wireless).

See MAC Address on page 78 for more information.

View the Primary TCP/IP Port

View the Ethernet TCP port number, over which labels and commands can be sent for processing.

*This menu item, which cannot be modified from the control panel, appears only if a wired or wireless print server is installed in your printer.

View the Alternate TCP/IP Port

View the alternate Ethernet TCP port number, over which labels and commands can be sent for processing.

*This menu item, which cannot be modified from the control panel, appears only if a wired or wireless print server is installed in your printer.

4/8/14 ZT400 Series™ User Guide P1066582-002