Zebra Technologies ZT400 Display.contrast, Device.idledisplayformat, LCD Contrast, Idle Display

72

Printer Configuration and Adjustment

Adjust Printer Settings

Table 2 • Calibration and Diagnostic Tools (Continued)

LCD Contrast	Change the contrast on the printer’s display.
	Accepted values:	3 to 15
	Related ZPL command(s):	none
	SGD command used:	display.contrast
	User menu item:	LCD CONTRAST on page 97
	Printer web page:	N/A
Idle Display	Select the information shown on the printer’s display when the printer is idle.
	Accepted values:	•	FW VERSION
		•	IP ADDRESS
		•	MM/DD/YY 24 HR
		•	M/DD/YY 12 HR
		•	DD/MM/YY 24 HR
		•	DD/MM/YY 12 HR
	Related ZPL command(s):	none
	SGD command used:	device.idle_display_format
	User menu item:	IDLE DISPLAY on page 97
	Printer web page:	N/A
Power-Up Action	Set the action for the printer to take during the power-up sequence.

•CALIBRATE adjusts sensor levels and thresholds, determines the label length, and feeds the media to the next web.

•FEED—feeds the labels to the first registration point.

•LENGTH determines the label length using current sensor values, and feeds the media to the next web.

•NO MOTION tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.

•SHORT CAL sets the media and web thresholds without adjusting sensor gain, determines the label length, and feeds the media to the next web.

Accepted values:	•	CALIBRATE
	•	FEED
	•	LENGTH
	•	NO MOTION
	•	SHORT CAL
Related ZPL command(s):	^MF
SGD command used:	ezpl.power_up_action
User menu item:	POWER UP ACTION on page 97
Printer web page:	View and Modify Printer Settings > Calibration

P1066582-002 ZT400 Series™ User Guide 4/8/14