Zebra Technologies ZT400 manual Clean the Cutter Module, 140

140

Routine Maintenance

Cleaning Schedule and Procedures

Clean the Cutter Module

If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.

Caution • For personnel safety, always power off and unplug the printer before performing this procedure.

To clean the cutter module, complete these steps:

1.Turn the printer off (O), and unplug the printer from its power source.

2.Raise the media door.

3.Remove media that is loaded through the cutter module.

4.Loosen and remove the thumbscrew and lock washer on the cutter shield.

P1066582-002 ZT400 Series™ User Guide 4/8/14