Zebra Technologies ZT400 manual Load the Ribbon on

Printer Setup and Operation

Load the Media—Rewind Mode

12.Rotate the printhead-open lever (1) downward until it locks the printhead in place.

1

13.Does the media that you are using require ribbon for printing? If you are not sure, see When to Use Ribbon on page 18.

If using…	Then…
Direct Thermal media (no ribbon needed)	Continue with step 14.
Thermal Transfer media (ribbon needed)	a.	If you have not already done so,
		load ribbon in the printer. See
		Load the Ribbon on page 60.
	b. Continue with step 14.

14.Close the media door.

15.Set the printer to Rewind mode (for more information, see Print Mode on page 69).

55

4/8/14 ZT400 Series™ User Guide P1066582-002