Zebra Technologies ZT400 manual Adjust the Tear-Off Position, Adjust the Print Width

Printer Configuration and Adjustment

User Menus—SETTINGS Menu

95

	TEAR OFF
▼	0	▲
	PRINT WIDTH
▼	832	▲
	PRINT MODE
▼	TEAR OFF	▲
	LEFT POSITION
▼	0	▲

Adjust the Tear-Off Position

If necessary, adjust the position of the media over the tear-off bar after printing.

See Tear-Off Position on page 68 for more information.

Adjust the Print Width

Specify the width of the labels being used. The default value is the maximum width for the printer, based on the printhead’s DPI value.

See Print Width on page 69 for more information.

Select the Print Mode

Select a print mode that is compatible with your printer options. See Print Mode on page 69 for more information.

Adjust the Label Left Position

If necessary, shift the print position horizontally on the label. Positive numbers move the left edge of the image toward the center of the label by the number of dots selected, while negative numbers move the left edge of the image toward the left edge of the label.

See Label Left Position on page 69 for more information.

REPRINT MODE

▼ OFF▲

Set the Reprint Mode

When reprint mode is enabled, you can reprint the last label printed either by issuing certain commands or by pressing the

LEFT ARROW on the control panel.

See Reprint Mode on page 70 for more information.

4/8/14 ZT400 Series™ User Guide P1066582-002