Zebra Technologies ZT400 manual Ezpl.headcloseaction, Device.light.headopenbrightness

			Printer Configuration and Adjustment
			Adjust Printer Settings
	Table 2 • Calibration and Diagnostic Tools (Continued)
Head-Close	Set the action for the printer to take when you close the printhead.
Action	• CALIBRATE adjusts sensor levels and thresholds, determines the label length, and
	feeds the media to the next web.
	• FEED—feeds the labels to the first registration point.
	• LENGTH determines the label length using current sensor values, and feeds the
	media to the next web.
	• NO MOTION tells the printer not to move the media. You must manually ensure
	that the web is positioned correctly, or press feed to position the next web.
	• SHORT CAL sets the media and web thresholds without adjusting sensor gain,
	determines the label length, and feeds the media to the next web.
	Accepted values:	•	CALIBRATE
		•	FEED
		•	LENGTH
		•	NO MOTION
		•	SHORT CAL
	Related ZPL command(s):	^MF
	SGD command used:	ezpl.head_close_action
	User menu item:	HEAD CLOSE ACTION on page 98
	Printer web page:	View and Modify Printer Settings > Calibration
Head-Open Light	Set the brightness of the light that turns on when the printhead is open.
	Accepted values:	•	HIGH
		•	MEDIUM
		•	LOW
		•	OFF
	Related ZPL command(s):	N/A
	SGD command used:	device.light.head_open_brightness
	User menu item:	HEAD OPEN LIGHT on page 98
	Printer web page:	N/A
Cover-Open	Set the brightness of the light that turns on when the media door is open.
Light
	Accepted values:	•	HIGH
		•	MEDIUM
		•	LOW
		•	OFF
	Related ZPL command(s):	N/A
	SGD command used:	device.light.cover_open_brightness
	User menu item:	COVER OPEN LIGHT on page 98
	Printer web page:	N/A

73

4/8/14 ZT400 Series™ User Guide P1066582-002