Zebra Technologies ZT400 manual 109

RFID TEST

READ OK

WRITE OK

START

RFID PROGRAM POS.

▼ F0▲

Printer Configuration and Adjustment

User Menus—RFID Menu

Perform an RFID Test

During the RFID test, the printer attempts to read and write to a transponder. No printer movement occurs with this test.

If you wish to test an RFID label:

1.Position the RFID label with its transponder over the RFID antenna array.

2.Press RIGHT SELECT to select START.

The results of the test are shown on the display.

See RFID Test on page 80 for more information.

Display or Change the RFID Programming Position

This menu item displays the current programming position. If the desired programming position is not achieved through RFID tag calibration, a value may be specified.

See Programming Position on page 81 for more information.

109

RFID ANTENNA

▼ A1▲

Display or Change the RFID Antenna Element

This menu item displays the RFID antenna element in use. If the desired antenna element is not selected through RFID tag calibration, a value may be specified.

See RFID Antenna Element on page 81 for more information.

RFID READ POWER

▼ 16▲

Display or Change the RFID Read Power

This menu item displays the current read power setting. If the desired read power is not achieved through RFID tag calibration, a value may be specified.

See RFID Read Power on page 82 for more information.

RFID WRITE POWER

▼ 16▲

Display or Change the RFID Write Power

This menu item displays the current write power setting. If the desired write power is not achieved through RFID tag calibration, a value may be specified.

See RFID Write Power on page 82 for more information.

4/8/14 ZT400 Series™ User Guide P1066582-002