7-2 User’s Reference Guide

A screen similar to the following appears:

Netopia R3100-UP v4.3

Easy Setup...

WAN Configuration...

System Configuration...

Utilities & Diagnostics...

Statistics & Logs...

Quick Menus...

Quick View...

Return/Enter goes to Easy Setup -- minimal configuration.

You always start from this main screen.

If you do not see the Main Menu, verify that:

the computer used to view the console screen has its serial port connected to the Netopia R3100’s “Console” port or an Ethernet connection to one of its Ethernet ports. See “Connecting a local terminal console cable to your router” on page 6-3or “Connecting through a Telnet session” on page 6-2.

the Telnet or terminal emulation software is configured for the recommended values.

if you are connecting via the Console port, the console’s serial port is not being used by another device, such as an internal modem, or an application. Turn off all other programs (other than your terminal emulation program) that may be interfering with your access to the port.

you have entered the correct password, if necessary. Your Netopia R3100’s console access may be password protected from a previous configuration. See your system administrator to obtain the password.

See Appendix A, “Troubleshooting,” for more suggestions.

Page 68
Image 68
Netopia R3100 manual See Appendix A, Troubleshooting, for more suggestions