Manuals / Netopia / Computer Equipment / Network Router

Netopia R3100 manual IP parameters default proﬁle screen

Models: R3100

1 320

Download 320 pages 53.76 Kb

Page 96

8-8 User’s Reference Guide

IP parameters (default proﬁle) screen

The IP Parameters (Default Proﬁle) screen allows you to conﬁgure various IP parameters for IDSL connections established without an explicitly conﬁgured connection proﬁle:

IP Parameters (Default Profile)

Default Subnet Mask:	0.0.0.0
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:	Both
Transmit RIP:	v2 (multicast)

The Netopia R3100 ISDN Router always acts as a DHCP client on the IDSL link when using a Default Proﬁle. The DHCP server will supply a local IP address and subnet mask. For an IDSL link, Network Address Translation (NAT) is enabled by default in the Default Proﬁle and the Default Subnet Mask is set to 0.0.0.0. For details on setting up IP Parameters see “IP Setup and Network Address Translation” on page 11-1.

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet network that the Netopia R3100 needs to recognize. Set to “Both” (the default) the Netopia R3100 will accept information from either RIP v1 or v2 routers. Alternatively, select Receive RIP and select v1 or v2 from the popup menu. With Receive RIP set to “v1,” the Netopia R3100’s Ethernet port will accept routing information provided by RIP packets from other routers that use the same subnet mask. Set to “v2,” the Netopia R3100 will accept routing information provided by RIP packets from other routers that use different subnet masks.

If you want the Netopia R3100 to advertise its routing table to other routers via RIP, select Transmit RIP and select v1, v2 (broadcast), or v2 (multicast) from the popup menu. With Transmit RIP v1 selected, the Netopia R3100 will generate RIP packets only to other RIP v1 routers. With Transmit RIP v2 (broadcast) selected, the Netopia R3100 will generate RIP packets to all other hosts on the network. With Transmit RIP v2 (multicast) selected, the Netopia R3100 will generate RIP packets only to other routers capable of recognizing RIP v2 packets.

Image 96

Netopia R3100 manual IP parameters default proﬁle screen

Contents

Netopia R3100 Isdn Routers Part Number Contents Ii User’s Reference Guide Part II Advanced Configuration Iv User’s Reference Guide Aurp Vi User’s Reference Guide Part III Appendixes Viii User’s Reference Guide Contents User’s Reference Guide Conﬁguration options for your Netopia R3100 Isdn Router Small Ofﬁce connection to the Internet Small Ofﬁce connection to the Internet Direct Connection to a Corporate Ofﬁce Telecommuter Conﬁgured to accept incoming dial-up connections Conﬁgured for Idsl Part I Getting Started User’s Reference Guide Features and capabilities Chapter IntroductionOverview IntroductionHow to use this guide Chapter Making the Physical Connections Find a locationWhat you need Making the Physical ConnectionsIdentify the connectors and attach the cables Netopia R3100 Isdn Router Back Panel Ports Cable to your router on Services on Netopia R3100 Isdn Router Status Lights Netopia R3100 LED front panelChapter Setting up your Router with the SmartStart Wizard Setting up your Router with the SmartStart WizardBefore running SmartStart Setting up your Router with the SmartStart Wizard SmartStart Wizard conﬁguration screensEasy or Advanced setup Easy optionSetting up your Router with the SmartStart Wizard User’s Reference Guide Setting up your Router with the SmartStart Wizard User’s Reference Guide Advanced option Connection Proﬁle screen on Dynamic conﬁguration recommended Conﬁguration tabStatic conﬁguration optional Add. Repeat this process for the secondary DNS Conﬁguring TCP/IP on Macintosh computers TCP/IPTCP/IP or MacTCP Dynamic conﬁguration using MacIP optional Setting up your Router with the SmartStart Wizard User’s Reference Guide Chapter Connecting Your Local Area Network Connecting Your Local Area NetworkReadying computers on your local network Connecting to an Ethernet network 10Base-T10BASE-T Remote console Connecting to a LocalTalk network Wiring guidelines for PhoneNET cabling User’s Reference Guide Chapter SmartView SmartView overviewSmartView Navigating SmartView General Machine informationConnection Proﬁles Event history pagesDevice Event History WAN Event History Standard Html web-based monitoring pages User’s Reference Guide Chapter Console-based Management About Console-based ManagementConsole-based Management Connecting through a Telnet session Connecting a local terminal console cable to your router Conﬁguring Telnet softwarePC ANSI-BBS Navigating through the console screens User’s Reference Guide Chapter Easy Setup Easy Setup console screensHow to access the Easy Setup console screens Easy SetupSee Appendix A, Troubleshooting, for more suggestions Beginning Easy Setup Isdn Easy SetupPPP Cancel Idsl Easy Setup Easy Setup Proﬁle Previous ScreenUser’s Reference Guide IP Easy Setup Previous Screen Next ScreenEasy Setup Security Conﬁguring Frame Relay Easy Setup Frame Relay screens IsdnSetup Isdn Line Configuration WAN Conﬁguration Frame Relay screensFrame Relay conﬁguration Easy Setup Frame Relay Dlci conﬁguration Displaying a Frame Relay Dlci conﬁguration table Changing a Frame Relay Dlci conﬁguration ADD Dlci NOW Cancel Adding a Frame Relay Dlci conﬁgurationDeleting a Frame Relay Dlci conﬁguration Part II Advanced Configuration User’s Reference Guide Chapter WAN and System Configuration Creating a new Connection ProﬁleWAN and System Conﬁguration Add Connection Proﬁle screen appears IPX Profile Parameters Remote IPX Network BAP Telco Options Initiate Data Service 64 kb/sec Dial Default Proﬁle How the default proﬁle works Customizing the Default Proﬁle Configuration Default ProfileIP parameters default proﬁle screen WAN and System Conﬁguration IPX parameters default proﬁle screen Auxiliary Port ConﬁgurationSystem Conﬁguration screens System Conﬁguration features PAP Network Protocols Setup Filter Sets FirewallsIP Address Serving Date and TimeMM/DD/YY Upgrade Feature Set Console ConﬁgurationSnmp Simple Network Management Protocol SecurityTelephone setup LoggingNov Chapter Using SmartPhone for Telephone Services Using SmartPhone for Telephone ServicesSpecifying telephone connections Inbound Directory Number Using SmartPhone for Telephone Services Deﬁning priority ringing Preview RingAdvanced calling features Line provisioningConﬁguring supplementary services Chapter Call Accounting and Default Answer Profile Cost control feature -- call accountingCall Accounting and Default Answer Proﬁle Viewing call accounting statistics Call Accounting Statistics screen appears Scheduled connections Viewing scheduled connections Adding a scheduled connection Set Weekly Schedule Set Once-Only Schedule Default Answer Proﬁle How the Default Answer Proﬁle worksModifying a scheduled connection Deleting a scheduled connectionCustomizing the default proﬁle Call Accounting and Default Answer Proﬁle Call acceptance scenarios Chapter IP Setup and Network Address Translation Network Address Translation featuresIP Setup and Network Address Translation HOW NAT Works Using Network Address Translation ISP Using multiple Connection Proﬁles Associating port numbers to nodesNetwork Address Translation guidelines IP setup IP Setup and Network Address Translation Select Add Export. The Add Exported Service screen appears IP Setup IP subnets IP Setup and Network Address Translation Static routes Viewing static routes Adding a static route Rules of static route installation Modifying a static routeDeleting a static route Main System IP Address Menu Configuration Serving 163.176.56.90 Dhcp NetBIOS Options MacIP Kip Forwarding Options You have ﬁnished your IP Setup Chapter IPX Setup IPX FeaturesIPX Setup IPX DeﬁnitionsService Advertising Protocol SAP IPX addressSocket Routing Information Protocol RIPNetBIOS IPX setupIPX Spooﬁng Default Gateway Address IPX routing tables User’s Reference Guide Chapter AppleTalk Setup Installing AppleTalkAppleTalk Setup AppleTalk networks AppleTalk protocolAppleTalk Setup MacIP AurpRouters and seeding Conﬁguring AppleTalk EtherTalk Setup LocalTalk Setup Aurp setup Viewing Aurp partnersAurp Free Trade Zone Adding an Aurp partner Modifying an Aurp partnerDeleting an Aurp partner Receiving Aurp connectionsConﬁguring Aurp Options User’s Reference Guide Chapter Monitoring Tools Quick View status overviewMonitoring Tools General status Current status Status lightsStatistics & Logs General StatisticsEvent histories Physical InterfaceNetwork Interface WAN Event History Request from our DNRouting tables Device Event HistoryIP routing table IPX routing table IPX Sap Bindery tableAppleTalk routing table Served IP Addresses IP Address Lease Management screen appears System Information SnmpSnmp Setup screen Community stringsSnmp traps Setting the IP trap receivers Viewing IP trap receiversModifying IP trap receivers Deleting IP trap receiversUser’s Reference Guide Chapter Security Suggested security measuresSecurity User accounts Protecting the Security Options screenProtecting the conﬁguration screens Dial-in Console Access Enable SmartStart/SmartView/Web Server Telnet accessAbout ﬁlters and ﬁlter sets What’s a ﬁlter and what’s a ﬁlter set?How ﬁlter sets work Filter priorityPacket First filter Match? Yes How individual ﬁlters work ﬁlter’s actionsﬁltering rule Parts of a ﬁlterPort numbers Port number comparisonsOther ﬁlter attributes Putting the parts togetherUDP Filtering example #1Design guidelines Filtering example #2An approach to using ﬁlters Working with IP ﬁlters and ﬁlter setsDisadvantages of ﬁlters Adding a ﬁlter set Naming a new ﬁlter set Input and output ﬁlters-source and destinationNetopia R-series Router Adding ﬁlters to a ﬁlter setADD this Filter NOW Cancel Viewing ﬁlter sets Viewing ﬁltersModifying ﬁlters Deleting ﬁltersModifying ﬁlter sets Deleting a ﬁlter setSample IP ﬁlter set TCP Icmp UDP Possible modiﬁcations Security IPX ﬁlters IPX packet ﬁlters Viewing and modifying packet ﬁltersAdding a packet ﬁlter IPX packet ﬁlter sets Deleting a packet ﬁlterViewing and modifying packet ﬁlter sets Adding a packet ﬁlter setADD Filter SET NOW Cancel IPX SAP ﬁlters Deleting a packet ﬁlter setViewing and modifying SAP ﬁlters Adding a SAP ﬁlter IPX SAP ﬁlter sets Deleting a SAP ﬁlterViewing and modifying SAP ﬁlter sets Adding a SAP ﬁlter setDeleting a SAP ﬁlter set Firewall tutorial General Firewall Terms Basic IP Packet ComponentsBasic Protocol Types Firewall design rules Example TCP/UDP PortsFirewall Logic Binary Representation Logical ANDingImplied Rules Filter Basics Established ConnectionsExample IP Filter Set Screen Example Filters Example NetworkExample Example Example Token Security Authentication Using the SecurID token cardKey Security Authentication Features of the Netopia R3100 Securing network environmentsSecurity authentication components Conﬁguring for security authenticationConnecting using security authentication Establishing a dial-on-demand DOD connection callCurrent Connection Status Establishing a manual connection call User’s Reference Guide Chapter Utilities and Diagnostics Utilities and DiagnosticsPing Start PingUtilities and Diagnostics Telnet client Stop PingTrace Route Telnet client screen appearsSecure Authentication Monitor Factory defaults Disconnect Telnet Console SessionTransferring conﬁguration and ﬁrmware ﬁles with Tftp Updating ﬁrmware Downloading conﬁguration ﬁles Uploading conﬁguration ﬁlesTransferring conﬁguration and ﬁrmware ﬁles with Xmodem Do you want to send a saved configuration to your Netopia? Restarting the system Isdn Switch Loopback Test User’s Reference Guide If the loopback test fails Part III Appendixes User’s Reference Guide Appendix a Troubleshooting Conﬁguration problemsTroubleshooting A-1 SmartStart Troubleshooting Console connection problemsNetwork problems Power outages How to get supportTechnical support Before contacting NetopiaOnline product information FAX-BackAppendix B Setting Up Telco Services Finding an Isdn service providerObtaining an Isdn line Choosing an Isdn lineSetup tips Physical Isdn lineIsdn Ordering Codes Switch protocol type Outside North America onlyDirectory and Spid numbers U models only Circuit ID number U models onlyTesting the Isdn line Long-distance Isdn calls North American models onlyCompleting the Isdn worksheet Isdn Telco Worksheet for North America Isdn Telco Worksheet for Outside North America User’s Reference Guide Appendix C North American Telco Provisioning for Isdn North American Telco Provisioning for IsdnUser’s Reference Guide Appendix D Setting Up Internet Services Finding an Internet service providerSetting Up Internet Services D-1 Unique requirementsSetting up a Netopia R3100 account Pricing and supportISP’s Point of presence Endorsements Deciding on an ISP accountObtaining information from the ISP Local LAN IP address information to obtainWith Network Address Translation Remote WAN IP address information to obtainRemote WAN IP address information to obtain What is IP? Appendix E Understanding IP AddressingAbout IP addressing Understanding IP Addressing E-1Subnets and subnet masks Example Using subnets on a Class C IP internet Understanding IP Addressing E-3Subnet masks Network conﬁguration ISP NetworkExample Working with a Class C subnet Distributing IP addressesUnderstanding IP Addressing E-5 BackgroundTechnical note on subnet masking Netopia R3100 Dhcp Server Characteristics ConﬁgurationUnderstanding IP Addressing E-7 Dhcp Address ServingUsing address serving Manually distributing IP addressesTips and rules for distributing IP addresses MacIP ServingUnderstanding IP Addressing E-9 Dhcp exampleNested IP subnets InternetUnderstanding IP Addressing E-11 Broadcasts Packet header typesAppendix F Understanding Netopia NAT Behavior Network ConﬁgurationBackground Understanding Netopia NAT Behavior F-1User’s Reference Guide Router Netopia Understanding Netopia NAT Behavior F-3Router Netopia Exported services Understanding Netopia NAT Behavior F-5Important notes Understanding Netopia NAT Behavior F-7 Summary Appendix G Understanding Frame Relay Virtual CircuitsUnderstanding Frame Relay G-1 Committed Information Rate CIR Committed Burst Size BcExcess Burst Size Be Addressing Local and Global DLCIsLocal Management Interface LMI Understanding Frame Relay G-3Encapsulation and Fragmentation Network Protocol Addressing and Virtual InterfacesFrame Relay partial mesh support Understanding Frame Relay G-5 User’s Reference Guide Appendix H Event Histories Leased line eventsIsdn events Event HistoriesIsdn event cause codes Event Histories User’s Reference Guide Event Histories User’s Reference Guide Appendix Isdn Conﬁguration Guide DeﬁnitionsAbout SPIDs Isdn Conﬁguration GuideExample SPIDs Dynamic B-channel usageOther incoming call restrictions User’s Reference Guide Appendix J Binary Conversion Table Binary Conversion Table J-1Decimal Binary Appendix K Further Reading Further Reading K-1User’s Reference Guide Further Reading K-3 User’s Reference Guide Appendix L Technical Specifications and Safety Information Technical Speciﬁcations and Safety Information L-1Pinouts for Auxiliary Port Modem Cable DSR Power requirements Technical Speciﬁcations and Safety Information L-3Description EnvironmentAgency approvals Regulatory noticesNorth America InternationalTechnical Speciﬁcations and Safety Information L-5 Important safety instructions Australian Safety InformationDeclaration for Canadian users Technical Speciﬁcations and Safety Information L-7 Telecommunication installation cautionsBattery User’s Reference Guide Glossary GlossaryUser’s Reference Guide Glossary User’s Reference Guide Glossary Remapping See network number remapping Glossary User’s Reference Guide Index Index-1Index-2 Index-3 ISPIndex-4 NATIndex-5 SpidIndex-6 Limited Warranty and Limitation of Remedies Limited Warranty and Limitation of RemediesUser’s Reference Guide