Maintenance
8Pull the belt off of the engine's pulley and move it under the engine belt pulleys.
9Pull out the belt through the opening under the pivot bearing and past the belt tensioner's disc.
Assembly
1Pull the belt through the opening under the pivot bearing and on the outside past the belt tensioner's disc.
2Pull the belt under the engine belt pulleys and fit it on the engine belt pulley.
3Fit the belt on the hydrostatic transmission pulley.
4Fit the cooling fan.
5Check that the centre belt is fitted correctly on its front pulley and fit the centre belt on the engine's pulley.
6Fit the hose holder in the middle and the belt guide for the centre belt.
Refit the spring (A).
A
B
Replacing the hydraulic pump's drive belt PR 17 AWD and PF 21 AWD
1Remove the transmission cover.
2Unhook the spring on the belt tensioner
3 Remove the belt guide for the centre belt.
4Pull off the centre belt from the engine's pulley and pull out the rear section.
32 – English