Assembly
IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken.
Contact
Footrest
Seat Bottom
1
•Place the seat bottom face down on a flat surface.
•At an angle, fit the footrest on the seat bottom, as shown.
Seat Bottom Tubes | Plastic |
Rings |
Plastic
Rings
2
Seat |
| |
Bottom | Plastic | |
Tubes | ||
Rings | ||
|
Plastic
Rings
3
• Align the holes in the plastic |
| |
rings and the seat bottom tubes. | #8 x 3/4" Screw - 4 | |
• Insert a #8 x 3/4" screw through | ||
SHOWN ACTUAL SIZE | ||
each plastic ring and into the | ||
| ||
seat bottom tubes, as shown. |
|
•Tighten the screws with a Phillips screwdriver. Do not
•Push the seat bottom tubes back and forth to be sure they are secured to the seat bottom. If the seat bottom tubes move, you have probably not fastened them properly. Remove the screws and check to be sure the screw holes in the seat bottom tubes and seat bottom plastic rings are aligned. Replace and tighten the screws.
Footrest
Insert Screws
Here
• Slide a seat bottom tube through each set of plastic rings on the seat bottom.
4
• Insert two #10 x 7/8" black | #10 x 7/8" Black Screw - 2 | |
SHOWN ACTUAL SIZE | ||
screws through the footrest | ||
| ||
and into the seat bottom. |
| |
• Tighten the screws with a Phillips screwdriver. | ||
4 Do not |
| |
