Storage
Care
Base
Tray
Hole
Peg
15
•Fit the holes on the base tray latches onto the pegs on the back of the high chair frame.
Pull Frame
Release Latch
16
•With the legs all the way open, lower the seat to position 1 (the lowest position).
•Pull the frame release latches forward and push the rear legs toward the front legs.
Printed in China
•The pad, headrest and bib are machine washable. Wash them separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly.
•The frame, base tray and mat may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the base tray.
•The food trays are dishwasher safe. Simply remove the food tray from the base tray and place in your dishwasher.
To remove the pad and headrest:
•Remove the four elastic loops from the pegs on the underside and back of the seat.
•Unfasten the pad strap and headrest strap from the seat back.
•Feed the shoulder portion of the waist/shoulder belts through the slots in the seat back, the pad and the headrest.
•Feed the waist portion of the waist/shoulder belts and crotch belt down through the slots in the seat.
•Remove the waist/shoulder belts and crotch belt through the slots in the pad.
•Unfasten the pad fasteners from the front edge of the seat bottom.
•Remove the pad.
To replace the pad and headrest: refer to Assembly steps 16-23.
IMPORTANT! Never use this product without the restraint system. Replace the waist/shoulder belts and crotch belt.
For other countries, outside the United States:
Canada: call
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand:
East Aurora, New York 14052, U.S.A. ©2002 Mattel, Inc. All Rights Reserved.
®and TM designate U.S. trademarks of Mattel, Inc.
