Assembly
Seat Back | Seat Back |
Pin | Pin |
Opening
Opening
Seat
Bottom
Assembly
5
•Turn the seat bottom assembly upright.
•Fit the seat back pins into the openings in the top side of the seat bottom assembly.
Frame Leg
7
•Pull the frame leg out on each frame to open. Make sure it “clicks” into place.
Short Leg
Tube
#10 x 7/8" Black Screw | Back Base | |
SHOWN ACTUAL SIZE | ||
|
Hinge
Hinge Rod
Long
Tapered
Leg Tube 
6 | 8 |
Front Base | |
|
•Turn the seat assembly face down.
•Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
•Insert a #10 x 7/8" black screw into the hinge rod.
•Tighten the screw with a Phillips screwdriver. Do not
• Set the seat assembly aside for Assembly step 11. | 5 |
|
•Identify the back and front base. The back base has short leg tubes and the front base has long, tapered leg tubes. You will use the back base for the next assembly step.
