Assembly
Front Leg Hole
Screw Retainers
Front Leg Hole
Front Base
Push 
Push
Seat 
Seat
Height 
Height
Adjuster | Adjuster |
13 | Seat Bottom |
Tube Ends |
• Push each seat height adjuster | #8 x 3/4" Screw - 2 | |
SHOWN ACTUAL SIZE | ||
to be sure they are completely | ||
| ||
on the seat bottom tubes. |
|
•Insert a #8 x 3/4" screw through each seat height adjuster and the ends of the seat bottom tube.
•Tighten the screws with a Phillips screwdriver. Do not
12
Screw Retainer - 2
#10 x 7/8" Black Screw - 2
SHOWN ACTUAL SIZE
#8 x 3/4" Screw - 2
SHOWN ACTUAL SIZE |
Seat | Seat | |
Height | ||
Height | ||
Adjuster | ||
Adjuster | ||
|
•Fit the frame front legs onto the front base.
•Fit a screw retainer over a hole in the front leg.
•Insert a #10 x 7/8" black screw through the screw retainer and front leg.
•Tighten the screw with a Phillips screwdriver. Do not
•Repeat this procedure to secure the other end of the front base with the remaining screw retainer and #10 x 7/8" black screw.
Seat
Bottom
Tube Ends
14 |
Back and |
Bottom View |
•From the back and bottom of the assembly, insert a #8 x 3/4" screw through both seat height adjusters and the ends of the seat bottom tube.
•Tighten the screws with a Phillips screwdriver.
7 Do not
