Maintenance
Checking the engine’s cooling air intake
Clean the air intake grille in the engine cover behind the driver’s seat.
Open the engine cover.
Check that the cooling intake is free from leaves, grass and dirt.
Check the air duct, located on the inside of the engine cover, ensure it is clean and does not rub against the cooling air intake.
A blocked cooling intake will interfere with the cooling of the engine, which can damage the engine.
WARNING! The cooling air intake rotates
!when the engine is running. Mind your fingers.
Replacing the rear drive belt PR 17 and PF 21
Removal
1Lift up the cutting unit
2Remove the transmission cover.
3 Unhook the spring (A) from the screw (B).
A
B
4Remove the hose holder in the middle and the belt guide for the centre belt.
5Pull off the centre belt from the engine's pulley and pull out the rear section.
6 Remove the cooling fan, it is held in place by a nut.
7 Remove the belt from the hydrostatic transmission pulley.
English – 31
