Maintenance
5 Remove the cooling fan, it is held in place by a nut.
6Pull the belt off of the pump's pulley.
7Pull the belt off of the engine's pulley and move it under the engine belt pulleys.
8Pull out the belt through the opening under the pivot bearing and past the belt tensioner's disc.
Assembly
1Pull the belt through the opening under the pivot bearing and on the outside past the belt tensioner's disc.
2Pull the belt under the engine belt pulleys and fit it on the engine belt pulley.
3Fit the belt on the pump's pulley.
4Fit the cooling fan.
5Check that the centre belt is fitted correctly on its front pulley and fit the centre belt on the engine's pulley.
6 Fit the belt guide for the centre belt.
7 Fit the spring on the belt tensioner.
Replacing the centre belt
Remove the hose holder in the middle (PR 17 and PF 21) and the rear belt guide for the centre belt (all machine types).
Remove the centre belt and mount a new belt.
Fit and adjust the belt guide with the lower belt on the engine belt pulley.
Fit the hose holder on PR 17 and PF 21
Check and adjust the belt tensioner. This is especially important when fitting a new belt.
English – 33
