Lubrication

Driver seat

Fold up the seat.

Lubricate the lengthways adjustment runners with oilcan.

Throttle and choke cables, lever bearings

•Remove the right side cover on the lever housing (3 screws) and open the engine cover.

•Lubricate the cables’ free ends with the oilcan, even those by the engine.

•Move the controls to the end points and lubricate again.

•Lubricate the joints, catches, and bearings for the cutting unit’s control levers with an oilcan.

Replace the lever housing’s side cover.

Lubricating the belt adjuster

Lubricate using a grease gun, 1 nipple from the right-hand side under the engine’s lower belt pulley, until grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

Checking the engine’s oil level.

Check the oil level in the engine when the Rider stands horizontal with the engine switched off.

Open the engine cover.

Loosen the dipstick, pull it up and wipe it off.

Now insert the dipstick again, without tightening it.

Pull the dipstick out again and read the oil level.

The oil level should be between the markings on the dipstick. If the level is approaching the ADD mark, top up the oil to the FULL mark on the dipstick.

The oil is topped up through the hole the dipstick sits in. Fill the oil slowly.

Tighten the dipstick correctly before starting the engine. Start and run the engine at idling speed for approx. 30 seconds. Turn off the engine. Wait 30 seconds and check the oil level. If necessary fill so that the oil comes up to the FULL mark on the dipstick.

The following oil classes are recommended:

•API Service Class: SF, SG, SH and SJ

Choose an oil with viscosity according to the temperature ranges in the figure:

Do not mix different types of oil.

Caution when using oils such as 5W-20, 10W-30 and 10W-40 the engine’s oil consumption increases. If these oils must be used, check the oil level frequently.

40 – English

Page 39 Page 41
Page 40
Image 40
Husqvarna PF 21 AWD, PR 17 AWD manual Driver seat, Throttle and choke cables, lever bearings, Lubricating the belt adjuster
Page 39 Page 41

PR 17, PF 21, PR 17 AWD, PF 21 AWD specifications

The Husqvarna PR 17, PR 17 AWD, PF 21, and PF 21 AWD are advanced pressure washers designed to deliver optimal performance, versatility, and convenience for various cleaning tasks. These models are engineered to cater to both residential and professional users, ensuring that maintaining cleanliness becomes an effortless task.

The Husqvarna PR 17 is a powerful pressure washer that sports a robust design, making it ideal for tackling medium to heavy-duty cleaning jobs. With a maximum pressure output of 1700 PSI and a flow rate of 1.2 GPM, it can efficiently clean driveways, patios, and vehicles. The PR 17 is equipped with an adjustable spray nozzle, providing users with the option to switch between different spray patterns, enhancing its versatility for different surfaces.

For those looking for added traction and stability, the PR 17 AWD (All-Wheel Drive) variant features a sophisticated four-wheel drive system. This technology ensures enhanced maneuverability over uneven terrains and difficult surfaces. The AWD feature is particularly beneficial for users who require improved mobility, whether it's on inclines or rough outdoor environments.

Moving to the PF 21 series, the Husqvarna PF 21 and PF 21 AWD both offer exceptional cleaning performance with their impressive specifications. The PF 21 boasts a powerful motor capable of delivering up to 2100 PSI, making it suitable for more demanding tasks. With a generous flow rate of 1.4 GPM, it can easily remove dirt and grime from larger areas efficiently. The PF 21 comes equipped with a set of interchangeable nozzles, allowing users to adjust the pressure according to their specific cleaning needs.

The PF 21 AWD model adds the all-wheel drive feature, enhancing the user experience by making it easier to navigate while cleaning larger spaces. This model is perfect for professionals and homeowners who require a reliable machine for frequent use. The ergonomic design of both PF 21 models ensures ease of handling and minimizes user fatigue, even during extended cleaning sessions.

These Husqvarna pressure washers also prioritize durability and maintenance ease. With features such as durable steel frames and easily accessible components, users can expect a long lifespan and hassle-free upkeep.

In summary, whether you choose the PR 17, PR 17 AWD, PF 21, or PF 21 AWD, each model offers unique features tailored to a range of cleaning tasks. Their combination of power, technology, and user-friendly designs make them an excellent choice for anyone looking to achieve spotless results.
Top Page Image Contents