Driving
Stop the engine
Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. Avoid idling the engine for long periods, as there is a risk of carbon
1 Lift the cutting unit with the hydraulic lifting lever.
The unit can then be secured in the raised position if necessary by moving the mechanical lifting lever backwards to the lock position.
If the cutting unit is left in the lower position, the start lock circuit will prevent engine starts.
2Move the throttle control to the MIN. position. Turn the ignition key to the ”STOP”.
3When the Rider is at a standstill, press down the parking brake and push in the locking button.
2
1
20 – English
