Zebra Technologies ZT400 Sensor Settings, Device.sensorselect, Ezpl.labelsensor, Ezpl.takelabel

86

Printer Configuration and Adjustment

Adjust Printer Settings

Sensor Settings

Table 6 • Sensor Settings

Sensor Type	Select the media sensor that is appropriate for the media that you are using. The
	reflective sensor typically is used only for black mark media. The transmissive sensor
	typically is used for other media types.
	Accepted values:	•	TRANSMISSIVE
		•	REFLECTIVE
	Related ZPL command(s):	^JS
	SGD command used:	device.sensor_select
	User menu item:	SENSOR TYPE on page 113
	Printer web page:	View and Modify Printer Settings > Media Setup
Label Sensor	Set the sensitivity of the label sensor.
	Important • This value is set during sensor calibration. Do not change this
	setting unless you are told to do so by Zebra Technical Support or by an
	authorized service technician.
	Accepted values:	0 – 255
	Related ZPL command(s):	none
	SGD command used:	ezpl.label_sensor
	User menu item:	LABEL SENSOR on page 113
	Printer web page:	View and Modify Printer Settings > Calibration
Take Label	Set the intensity of the take label LED.
	Important • This value is set during sensor calibration. Do not change this
	setting unless you are told to do so by Zebra Technical Support or by an
	authorized service technician.
	Accepted values:	0 – 255
	Related ZPL command(s):	none
	SGD command used:	ezpl.take_label
	User menu item:	TAKE LABEL on page 114
	Printer web page:	View and Modify Printer Settings > Calibration

P1066582-002 ZT400 Series™ User Guide 4/8/14