Zebra Technologies ZT400 manual Set the Maximum Label Length, Select the Display Language

96Printer Configuration and Adjustment User Menus—SETTINGS Menu

LABEL LENGTH MAX

▼ 39▲

Set the Maximum Label Length

Set the maximum label length to a value that is at least 1.0 in. (25.4 mm) greater than the actual label length plus the interlabel gap. If you set the value to one that is smaller than the label length, the printer assumes that continuous media is loaded, and the printer cannot calibrate.

See Maximum Label Length on page 70 for more information.

LANGUAGE

▼ ENGLISH ▲

TOOLS MENU

GO

Select the Display Language

If necessary, change the language that the printer displays. See Language on page 83 for more information.

Note • The selections for this parameter are displayed in the actual languages to make it easier for you to find one that you are able to read.

Tools Menu Shortcut

•To be taken to the next user menu, press OK or press

RIGHT SELECT to select GO.

GO

PRINT INFORMATION

SETTINGS

START

•To continue to navigate in the same user menu, press the

LEFT ARROW or RIGHT ARROW.

			GO
▼	LANGUAGE	▲	▼	DARKNESS	▲
	ENGLISH			10
					START

P1066582-002 ZT400 Series™ User Guide 4/8/14