Zebra Technologies ZT400 manual 121, Supplies light flashes

Printer Configuration and Adjustment

Calibrate the Ribbon and Media Sensors

5.Pull the media into the printer so that only the backing is between the media sensors.

6.Remove the ribbon (if used).

7.Rotate the printhead-open lever (1) downward until it locks the printhead in place.

1

8.Press PAUSE to begin the media calibration process.

•The PAUSE light turns off.

•The SUPPLIES light flashes.

•The control panel displays:

121

MEDIA/RIBBON CAL

CALIBRATING

PLEASE WAIT

4/8/14 ZT400 Series™ User Guide P1066582-002